15.64.5  AXES 

Controls  the  presence or absence of each axes and sets the attributes of
the axis.
SET AXES|AXIS [INHIBIT|ENABLE] [ALL|TOP|BOTTOM|RIGHT|LEFT|X|Y|Z] [ON|OFF]
     [FRONT[=[ON|OFF]]
     [BOTH[=[ON|OFF]]
     [THREE[=[ON|OFF]]
     [INTENSITY|WIDTH=n]
     [NOCOLOR|WHITE|RED|GREEN|BLUE|YELLOW|MAGENTA|CYAN]
     [NOTEXTURE|SOLID|DOTS|DASHES|DAASHES|DOTDASH|PATTERNED|FUNNY|SPACE]
     [PERMANENT]

Normally  AXES  are drawn at the first HIST, JOIN, BARGRAPH, PLOT, or PLOT
AXES command unless  inhibited  or  turned  off.   To  control  individual
elements of the axes use:
SET TICKS, SET LABELS, SET OUTLINE, SET SCALES