Calculation for the position of the beam dump

1.	Beam	238U 345 MeV/u 136Xe 345 MeV/u 124Xe 345 MeV/u 86Kr 345 MeV/u 78Kr 345 MeV/u 70Zn 345 MeV/u 48Ca 345 MeV/u 40Ca 345 MeV/u 36Ar 345 MeV/u 18O 345 MeV/u 18O 250 MeV/u 18O 230 MeV/u 16O 345 MeV/u 16O 250 MeV/u 14N 250 MeV/u 4He 320 MeV/u 2H 250 MeV/u	The available primary beams are listed in this page.
2.	Target	Be 0.1 mm Be 0.5 mm Be 1 mm Be 1.5 mm Be 2 mm Be 3 mm Be 4 mm Be 5 mm Be 6 mm Be 7 mm Be 8 mm Be 9 mm Be 10 mm Be 11 mm Be 12 mm Be 15 mm Be 17 mm Be 20 mm Be 30 mm Be 40 mm W 0.1 mm W 0.2 mm W 0.3 mm W 0.5 mm W 1 mm W 1.4 mm W 2.1 mm W 2.8 mm	The available targets are listed in this page.
3.	D1 Brho (Tm)		The maximum magnetic rigidity (Brho) of the D1 is 9.71Tm.
4.	Submit

---

How to determin the position of the beam dump

1. Select the primay beam
2. Select the target and its thickness
3. Input the Brho of the D1
4. Click the "Submit" button, and then the proper position of the beam dump is shown in a new web page.

---

If you have any questions about this site, please contact to BigRIPS team.
Web Programming: Yohei Shimizu, BigRIPS, RIKEN Nishina Center, yshimizu@ribf.riken.jp